CamHi for PC: HiP2P Client, Emulator, and RTSP Setup Guide

CamHi does not have one single official desktop program, but you can watch your cameras on a PC three ways: the HiP2P Client software that camera sellers ship for Windows, the official Android CamHi app running inside an emulator, or a direct RTSP stream opened in VLC. This guide walks through all three CamHi setup routes.

What is actually official for CamHi on PC

This is the part most guides get wrong, so let’s be precise. CamHi and CamHiPro are companion apps for IP cameras built on Hichip camera modules. The camera module maker’s own website only covers hardware and offers no software downloads at all. The only download source you can call fully official is the CamHi listing on Google Play, which has over 1 million installs.

For Windows, the companion program everyone uses is HiP2P Client, a free camera management tool that supports the same UID connection system as CamHi. There is no central vendor page for it. Instead, the camera brands that build on these modules distribute the HiP2P Client installer through their own support pages. Enster, for example, hosts the “CamHi Solution HiP2P Client” setup file in its official support section. Sites like camhi.pro and camhi.app that rank for this search are third-party pages, not the vendor, so treat any installer from them with caution.

Get CamHi (Google Play)

Option 1: HiP2P Client, the Windows companion

If you want a proper desktop experience on your Windows laptop or desktop, HiP2P Client is the tool to use. It can display up to 16 camera streams in a single window, supports two-way audio on compatible cameras, and handles recording to your PC’s drive.

1. Get the HiP2P Client installer from the support page of the brand that sold you the camera. If your seller does not host it, Enster’s official support section carries the standard CamHi Solution build.
2. Run the installer and open the program. The default login user is admin with a blank password on most builds, so set a password immediately.
3. Click Config, then add your camera. If the camera is on the same network, the LAN search finds it automatically. Otherwise add it manually with the UID printed on the camera’s label plus the camera password.
4. Drag the camera from the device list onto a display pane to start the live stream.

Option 2: Install CamHi on Windows with an emulator

If you would rather use the exact same CamHi app you have on your phone, run it inside an Android emulator. This works on Windows 11 and Windows 10, and it is the practical route on a Mac. BlueStacks is the emulator we recommend for camera apps because its network handling is reliable.

1. Install BlueStacks from bluestacks.com, then sign in to the Play Store inside it with your Google account.
2. Search for CamHi (or CamHiPro for newer cameras) and install it from the official listing.
3. Open the app and add your camera. Use the manual UID entry rather than the QR scan option, since the emulator has no rear camera to scan with. Type the UID from the camera label and enter the camera password.
4. Allow the app’s notification permission if you want motion alerts to pop up on your desktop while the emulator runs.

One CamHi quirk worth knowing: the app does not use an account system. Cameras are tied to UIDs, so the same camera can be watched from your phone and the emulator at the same time without logging anything out.

Option 3: RTSP stream in VLC, no CamHi needed

Most cameras that use CamHi also expose a standard RTSP stream on the local network. If you only need to check the feed occasionally from your PC, open VLC, choose Media, then Open Network Stream, and enter the RTSP address from your camera’s manual (it typically includes the camera’s local IP address and login). This skips CamHi software entirely, though you lose alerts and pan-tilt controls.

CamHi vs CamHiPro on Windows

CamHiPro is the newer app from the same publisher and also has over 1 million installs. Newer cameras usually recommend CamHiPro, older ones CamHi, and many cameras work in both. There is no separate CamHiPro for Windows either: the emulator steps above are identical, just install CamHiPro instead. HiP2P Client works with cameras from both apps. If you run cameras from other ecosystems too, see our guides to EZVIZ on PC and GCMob on PC, which follow the same official-first approach.

Frequently asked questions

What is the CamHiPro desktop app?

There is no official CamHiPro desktop app. Pages advertising one are either repackaging the HiP2P Client Windows software or walking you through an Android emulator install. Both routes are covered above, and neither requires downloading anything from unofficial “CamHiPro for PC” sites.

Does CamHi work on Windows 7 or older PCs?

The HiP2P Client route is your best option on an older machine, since the lightweight Windows program runs on systems that current emulators no longer support. BlueStacks now requires Windows 10 or 11, so the emulator route is out on Windows 7.

How do I access my camera on my PC without the app?

Use the RTSP method: open the camera’s stream address in VLC on the same network. It gives you the live view with no CamHi software installed, but no motion alerts or camera controls.

Can I use CamHi on a Mac?

Yes, through an Android emulator. Install BlueStacks Air (the macOS build), add CamHi from the Play Store inside it, and connect with your camera’s UID exactly as on Windows. The VLC RTSP method also works on macOS.

Verdict

For everyday monitoring on a Windows PC, HiP2P Client from your camera seller’s support page is the most capable option: multi-camera view, recording, and two-way audio in a native program. Use the emulator route when you want the familiar phone interface or you are on a Mac, and keep the VLC trick in your pocket for quick checks. For more camera and security tools, browse our utility apps for PC hub.